{"id":586,"date":"2026-10-21T12:04:52","date_gmt":"2026-10-21T04:04:52","guid":{"rendered":"http:\/\/www.iranabeauty.com\/blog\/?p=586"},"modified":"2026-10-21T12:04:52","modified_gmt":"2026-10-21T04:04:52","slug":"how-to-make-layered-resin-jewelry-charms-4319-470932","status":"publish","type":"post","link":"http:\/\/www.iranabeauty.com\/blog\/2026\/10\/21\/how-to-make-layered-resin-jewelry-charms-4319-470932\/","title":{"rendered":"How to make layered resin jewelry charms?"},"content":{"rendered":"

Hey guys, if you\u2019ve been scrolling through resin jewelry accounts lately, you\u2019ve probably seen those layered resin charms that look like tiny, wearable works of art\u2014think little moon phases with a glittery core, geometric shapes stacked with colored resin, or even mini scenes like a tiny flower tucked between two clear layers. As someone who\u2019s been supplying these charms to small jewelry brands and handmade shops for the past five years, I\u2019ve had my fair share of trial and error (read: way too many sticky, lopsided charms that I had to toss in the trash). Today I\u2019m breaking down exactly how we nail those perfect layered resin charms\u2014no fancy equipment needed, just good prep and a little patience. Resin Jewelry Charms<\/a><\/p>\n

<\/p>\n

First off, let\u2019s talk about why layered resin is so popular. It\u2019s not just the \u201cwow\u201d factor\u2014layered pieces let you play with depth, color, and texture way more than a single pour. You can have a opaque base, a translucent middle with glitter or tiny inclusions, and a clear top layer that seals it all in. The trick? Taking it slow, because resin doesn\u2019t play well with rushing. If you pour too fast between layers, you get bubbles that are impossible to get out, or layers that mix and look muddy instead of crisp. I used to test every layer at the same time, but now we batch a little\u2014we\u2019ll do 3 or 4 small charms in one go instead of 20, so we can focus on each layer without messing up.<\/p>\n

Let\u2019s start with the supplies, because you can\u2019t make charms without the right stuff. I keep this list pretty simple, and I swear by it for consistency: first, resin\u2014we use a two-part epoxy, not the cheap self-pouring stuff from craft stores that gets yellowed after a few months. Yellowing is the last thing you want in a charm that people are gonna wear every day, so splurge on a UV-stabilized resin. You\u2019ll also need: silicone molds (round, square, tiny charms shapes\u2014we use ones with slightly curved edges because they sit better on jewelry), mixing cups (plastic, disposable\u2014no glass, because resin sticks like glue), stir sticks (wooden, not metal, since metal can react with resin colors), rubbing alcohol (91% is best for popping bubbles), a heat gun (not a hair dryer\u2014hair dryer blows lint everywhere, trust me), and inclusions: mica powders, glitter, dried flowers (press them first!), tiny beads, or even resin pigment in liquid form. Oh, and if you want to add a bail (the little loop you attach the chain to), get those pre-made metal bails that are designed for resin\u2014gluing them in layer by layer works, but pre-made ones are way easier and don\u2019t fall off later.<\/p>\n

Now, let\u2019s get into the step-by-step process, the same way our team does it here in the shop. First, prep your mold. I know it\u2019s tempting to skip this, but wiping your mold with rubbing alcohol and a lint-free cloth gets rid of any leftover resin dust or oil that can make your charm stick or have foggy spots. No one wants a foggy clear layer, right? Then, if you\u2019re adding bails, place them in the mold now\u2014we use a toothpick to hold them upright, so they don\u2019t tip while we pour. That small fix saved us so many lopsided bails in the beginning.<\/p>\n

First layer: this is usually your base layer. We either do a plain opaque color or a subtle tint here\u2014nothing too heavy on inclusions, because the middle layers are where the fun stuff goes. Mix your resin according to the instructions (super important\u2014too much of part B makes it stay sticky, too little makes it cure rock hard and break easily). For a 1-inch charm, we do 10 grams total resin, so that\u2019s 5 grams of part A and 5 grams of part B\u2014exact measurements matter, don\u2019t guess. Add your pigment, stir slowly for about a minute, scraping the sides and bottom of the cup so no unmixed resin hides there. Then, pour it into your mold just enough to cover the bottom, like 1\/8 of an inch. Now, pop the bubbles: hold your heat gun about 6 inches away, wave it over the layer gently for 10-15 seconds. If you hold it too close, the resin will bubble up and leave holes, so take it slow. Once no more bubbles pop, set it aside to cure for 1.5 hours\u2014wait, not overnight, that\u2019s a mistake I made once. If you let the first layer cure fully, your middle layer won\u2019t stick. 1.5 hours is the \u201ctacky cure\u201d time\u2014touch it lightly, it\u2019s firm but still has a little give, perfect for layering.<\/p>\n

Second layer: this is where you get creative. This is your translucent layer, or the layer with all the inclusions. Let\u2019s say you want a glittery middle\u2014add fine metallic glitter or chunky holographic glitter to your mixed resin. Don\u2019t overdo it, though\u2014too much glitter makes the resin cloudy, and no one wants a charm that looks like a glitzy rock. If you\u2019re adding dried flowers, make sure they\u2019re fully pressed and have no extra moisture (moisture = bubbles, yuck). Tiny beads work too, just make sure they\u2019re small enough to fit in the mold. Now, pour this layer carefully over the first cured layer\u2014don\u2019t pour it straight from the cup like you\u2019re watering a plant, hold the cup at an angle and let it run down the side of the mold, so you don\u2019t disturb the first layer. Once it\u2019s filled about halfway, bubble it again with the heat gun. This layer cures a little longer\u20143 hours, because it\u2019s thicker than the first one. Test it again: if it doesn\u2019t leave a fingerprint when you touch it, you\u2019re good.<\/p>\n

Third layer: the top clear layer. This is what makes the charm look smooth and professional, and it seals all the inclusions so they don\u2019t fall off. I swear by this step\u2014without it, your charm will get scuffed and the glitter will flake off after a few wears. Mix a new batch of clear resin (use a clear, high-quality one, not tinted), pour it slowly over the cured second layer, making sure it fills the mold all the way to the top, no gaps. Bubble this one extra well, because the clear layer shows every tiny bubble. Hold the heat gun a little further away this time, since the resin is thin and can evaporate if you get too close. Then, let it cure overnight\u20148 to 12 hours, that\u2019s non-negotiable. If you take it out too early, it\u2019ll be sticky and smudge.<\/p>\n

Wait, but what if you want more than three layers? No problem\u2014just repeat the first two steps: add a thin cured layer, then another creative layer, then clear. We do four-layer charms sometimes, like a white base, pink middle, glitter purple layer, then clear top\u2014super popular for summer jewelry. The key is keeping each layer thin, so they don\u2019t take too long to cure and don\u2019t mix together.<\/p>\n

Now, let\u2019s talk about common mistakes we still make (yes, even after five years, I mess up) so you can avoid them. Number one: not measuring the resin correctly. I\u2019ve gotten so many messages from people saying their charms are sticky or crumbly, and 9 times out of 10 they mixed A and B wrong. Use a scale, don\u2019t use the little lines on the cup\u2014those are never accurate. Number two: rushing layers. If you pour a new layer before the first one is tacky, they\u2019ll mix and look like a muddy mess. I learned this the hard way when I tried to make a moon phase charm in 10 minutes and ended up with a brown blob that I had to throw away. Number three: using the wrong heat tool. Hair dryers blow lint\u2014 I once had a charm that had a little piece of my cat\u2019s hair in it, which was not cute for a customer. Heat guns are cheap, get one. Number four: not prepping the mold. Wiping with rubbing alcohol takes 10 seconds, and it saves you from picking charm pieces out of a trash can for hours.<\/p>\n

As a supplier, I see a lot of small brands struggle with making their own layered charms, which is why we\u2019ve been doing this for other people too. Our process is the same as what I just told you\u2014we batch process 50 charms at a time, following these exact steps, so every charm is consistent. Consistency is huge for jewelry brands\u2014they need charms that are the same size, same color, no random bubbles, so their customers get the same product every time. We also offer custom colors and inclusions, if someone wants a specific glitter or a dried flower that\u2019s only in season.<\/p>\n

If you\u2019re a small jewelry maker, a boutique shop owner, or someone who just needs a bulk order of high-quality layered resin charms, we can help. We source our resin and supplies from sustainable vendors too, so if that\u2019s important to your brand, we\u2019ve got you covered. Our turnaround is fast\u2014usually 5-7 business days for a standard order, and we give samples before you commit so you can see the quality for yourself. No minimum order? Wait, no, we have a small minimum because we need to keep our pricing fair, but it\u2019s super low\u2014way lower than other suppliers I\u2019ve worked with.<\/p>\n

Wait, one more pro tip: after curing, let the charms sit for 24 hours before shipping or selling. Sometimes resin has a slight \u201coff-gas\u201d in the first day, and letting it air out makes sure it\u2019s fully cured and safe to wear. We learned that after a customer told us a charm smelled like plastic\u2014oops, that was our bad. Now we always wait the full day before packaging.<\/p>\n

If you\u2019ve never worked with resin before, don\u2019t be intimidated. I started out making charms in my kitchen after work, just to make extra cash, and now it\u2019s my full-time job. The layered part is just a matter of taking it step by step, not overcomplicating it. You don\u2019t need a fancy studio, just a table covered in a plastic sheet (resin gets everywhere, trust me) and a little patience. And if you\u2019re not interested in making them yourself, or you need bulk orders to keep your inventory up, we\u2019re here to help. We work with everyone from indie Etsy shops to small boutique chains, so whatever your needs are, we can adjust.<\/p>\n

<\/p>\n

So that\u2019s the lowdown on how to make layered resin jewelry charms\u2014no magic tricks, just good prep, correct measurements, and taking it slow. The best part is that each charm is unique, even if you make a batch of the same shape, because the inclusions and bubbles are tiny, individual details that make them special. If you\u2019re looking to stock high-quality layered resin charms for your store, or you need custom pieces for your next collection, reach out to us to chat about your order. We\u2019re easy to work with, we answer questions fast, and we don\u2019t do bulk pricing that locks you into a huge order you don\u2019t need.<\/p>\n

Resin Keychains<\/a> References:<\/p>\n

    \n
  1. "The Complete Guide to Working with Epoxy Resin" – Resin Crafts Magazine, 2022<\/li>\n
  2. "Curing Times for Two-Part Epoxy Resin" – Industrial Adhesives Journal, 2021<\/li>\n
  3. "Common Mistakes in Layered Resin Crafting" – Handmade Jewelry Resource, 2023<\/li>\n<\/ol>\n
    \n

    Shengzhou Shengteng Accessories Co., Ltd.<\/a><\/p>\n

    Address: Room 701, Building 23, Wanyang Innovation City, No. 368 Kaiya Road, Changle Town, Shengzhou City, Shaoxing City, Zhejiang Province
    E-mail: 15869252296@163.com
    WebSite:     https:\/\/www.shengtengjewelry.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey guys, if you\u2019ve been scrolling through resin jewelry accounts lately, you\u2019ve probably seen those layered … How to make layered resin jewelry charms?<\/span>Read more<\/a><\/p>\n","protected":false},"author":113,"featured_media":586,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[549],"class_list":["post-586","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-resin-jewelry-charms-4baa-473d1a"],"_links":{"self":[{"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/posts\/586","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/users\/113"}],"replies":[{"embeddable":true,"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/comments?post=586"}],"version-history":[{"count":0,"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/posts\/586\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/posts\/586"}],"wp:attachment":[{"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/media?parent=586"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/categories?post=586"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.iranabeauty.com\/blog\/wp-json\/wp\/v2\/tags?post=586"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}