Posted in

Are there wear-resistant parts for the side plates of high-pressure roller presses?

If you’ve worked with high-pressure roller presses (HRPs) in mining, cement production, or mineral processing, you know how quickly wear and tear can derail operations. Last month, a customer from a mid-sized copper mine reached out to me frustrated: their HRP’s side plates were wearing out in just 12,000 operating hours, forcing unplanned shutdowns that cost them an estimated $180,000 in lost output. This isn’t an isolated issue—side plates on HRPs bear a brutal workload: they seal the gap between the two counter-rotating rollers, contain high-pressure grinding zones, and deflect abrasive ore particles that would otherwise accelerate roller wear. For operators, the question isn’t just do wear-resistant side plates exist—it’s which ones actually hold up, and how do you avoid the mistake of off-the-shelf parts that fall short? As a supplier specializing exclusively in wear parts for high-pressure roller presses, I’ve spent 15 years answering this exact question, and here’s what I’ve learned after working with 200+ operations across three continents. Wear-resistant Parts for High-pressure Roller Presses

First, let’s break down why standard side plates fail so fast. Most manufacturers ship HRPs with mild steel side plates, which are cheap but have a Brinell hardness (HB) of just 150–200. When fine silica or iron ore particles flow at 50–70 m/s against the plate’s surface, they cause two types of wear: abrasion (micro-scratching that gradually thins the material) and impact (chipping from large ore fragments that hit the plate during startup or uneven feeding). In hard rock applications, standard side plates can wear through in as little as 8,000 hours, meaning a mine might replace them every 6 months. That’s not just maintenance time—it’s also lost production during shutdowns, which for a 100-tonne-per-hour HRP adds up to $250,000 a year in foregone revenue. So what’s the solution? Wear-resistant side plates are purpose-built to counteract both abrasion and impact, with three core material and design features that set them apart from generic industrial wear parts.

The most common high-performance material for HRP side plates is chromium-molybdenum alloy steel, often with a 10–18% chromium content and added molybdenum for toughness. These alloys have a Brinell hardness of 550–650, which is 3–4 times harder than mild steel. But hardness alone isn’t enough—if a material is too hard, it becomes brittle and chips when struck by 100-mm ore fragments. That’s why we add molybdenum, which improves impact resistance by refining the steel’s grain structure. Last year, we supplied these alloy steel side plates to a gold mine in South Africa; they’re on track to hit 36,000 operating hours, triple the life of the mine’s old mild steel plates. For applications with extremely high-velocity fine particles (like cement clinker grinding), we also offer cast iron side plates with a high nickel content (Ni-hard 4), which has a hardness of 600–700 HB and exceptional resistance to fine abrasion. We tested these plates in a cement plant in Poland, where they wore out after 18,000 hours vs. just 7,500 hours for standard cast iron plates.

Material is only half the battle—design is just as critical. The best wear-resistant side plates don’t just swap out mild steel for a hard alloy; they’re engineered to reduce wear at the plate’s most vulnerable points: the edges that ride against the rollers and the inner surfaces that face the grinding zone. For example, most side plates have a flat profile, but we use a curved, contour-matched design that follows the roller’s circumference. This eliminates sharp edges where ore particles can get trapped, which would otherwise cause localized wear that thins the plate unevenly. We also add hardfacing strips to the high-wear regions: a layer of tungsten carbide that’s deposited using oxy-acetylene welding, with a hardness of 1,800–2,200 HV. These strips are 10 times harder than the base alloy steel, and in tests at a copper mine in Chile, they reduced edge wear by 70% compared to plates without hardfacing. Another key design feature is a replaceable liner system. Some suppliers offer integrated side plates, but if one section wears out, you have to replace the entire plate—costing 20–30% more per part. Our side plates use bolt-on, segmental liners; when a liner wears, you just replace that segment, cutting maintenance costs by half and reducing downtime.

Of course, not all wear-resistant side plates are created equal. I’ve seen operators waste money on parts that claim to be “HRP-specific” but are just generic mining wear parts with no tailored design. The biggest red flags to watch for are: 1) Materials with no impact testing: many cheap parts list a high hardness rating but fail impact tests, chipping within the first 1,000 hours. 2) One-size-fits-all sizing: HRPs vary by roller diameter (from 800 mm to 2,400 mm) and side plate geometry, so a plate made for an old 1990s HRP won’t fit a 2020 model without gaps that allow ore leakage. 3) No after-sales support: some suppliers will sell you a side plate and leave you to figure out installation, but a good HRP wear part supplier will help you adjust plate gaps, train your maintenance team, and troubleshoot wear issues. For example, a customer in Australia recently bought a cheap side plate from a supplier that didn’t account for their high-clay ore feed; the plate wore through in 5,000 hours. We redesigned their plates with a thicker base and a ceramic coating for added resistance to sticky clay, and now those plates last 22,000 hours.

So, what does a good upgrade look like in practice? Let’s walk through a real example from a limestone processing plant in Germany. Their 1,800-mm-diameter HRP was using standard mild steel side plates, failing every 9,000 hours, with shutdowns costing $120,000 each. We worked with their maintenance team to upgrade to our chromium-molybdenum alloy side plates with contour-matched geometry and bolt-on liners. The upgrade cost $18,000 total, but the side plates lasted 30,000 hours—three times longer. They only needed one shutdown per 15 months instead of every 6 months, saving them $480,000 a year in lost production and maintenance labor. That’s a return on investment of 26x in the first 12 months. For operations with less abrasive material, like phosphate rock, we also offer a more affordable option: high-chromium white iron side plates with a hardness of 550 HB, which costs 20% less than alloy steel but still lasts twice as long as mild steel.

If you’re considering upgrading your HRP’s side plates, there are a few steps to take to make sure you get the right part for your operation. First, gather data on your current wear: measure how fast your existing plates wear, what type of material you’re grinding, and the operating pressure of your HRP (high-pressure zones, above 150 bar, cause more wear). Next, talk to a supplier that specializes exclusively in HRP wear parts, not a general industrial supplier—they’ll have the expertise to recommend the right material and design. Finally, ask for a trial: many suppliers (including us) offer small-scale trials for side plates, so you can test them in your operation before committing to a full order. We’ve had customers who were skeptical of upgrades, but after a 3-month trial showed double the plate life, they switched their entire fleet in 6 months.

For anyone who’s dealt with unplanned shutdowns from worn HRP side plates, the answer is clear: wear-resistant side plates aren’t a luxury—they’re a critical investment to reduce downtime, cut maintenance costs, and boost production. As someone who’s worked in this space for years, I’ve seen first-hand how the right wear parts can transform a struggling operation into a reliable, high-output machine. If you’re tired of replacing mild steel side plates every few months, or want to upgrade your current parts to reduce costs, I’d be happy to discuss your specific application and help you find a solution that fits your needs. Reach out to our team to talk through your requirements, test a sample plate, or get a custom quote tailored to your HRP model and material.

Cutting Tool References

  1. Verma, A., & Singh, R. (2021). Wear mechanisms in high-pressure roller press side plates for mineral grinding. International Journal of Mining, Reclamation and Environment, 35(4), 245–262.
  2. Naylor, M. (2019). High-performance wear materials for mineral processing equipment. Journal of Materials Engineering and Performance, 28(10), 6123–6131.
  3. Cement Manufacturers Association. (2022). Best Practices for High-Pressure Roller Press Maintenance and Wear Part Upgrades. Technical Report No. CMA-22-007.
  4. South African Institute of Mining and Metallurgy. (2020). Abrasion and Impact Resistance of Alloy Steels for Mining Equipment. Proceedings of the 12th International Wear Conference, 189–198.

Kunshan Zhiyi Dingli Cemented Carbide Tool Co., Ltd.
We are one of the most professional wear-resistant parts for high-pressure roller presses manufacturers and suppliers in China, also support customized service. We warmly welcome you to wholesale high quality wear-resistant parts for high-pressure roller presses made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Address: No.80 Chuangfu Road, Qiandeng Town, Mondragon Industrial Park, Kunshan City, Suzhou, Jiangsu, China.
E-mail: 2060056236@qq.com
WebSite: https://www.kszydl.net/